Cluster Maintenance: Difference between revisions

From Powers Wiki
No edit summary
No edit summary
Line 11: Line 11:


= Operating System =
= Operating System =
The cluster currently runs Debian 7.0 ''amd64''. The recommended method of installing the base operating system is to download the ''Small CD'' ISO from [http://www.debian.org/distrib/netinst Debian] and burn it to a CD/DVD.
The cluster currently runs Debian 8.0 ''amd64''. The recommended method of installing the base operating system is to download the ''Small CD'' ISO from [http://www.debian.org/distrib/netinst Debian] and burn it to a CD/DVD.


The (MBR) partitioning of the main 1TB disk should be:
The (MBR) partitioning of the main 1TB disk should be:

Revision as of 17:39, 23 July 2019

Hardware

The cluster was built from parts ordered from Newegg. The important components of the system are as follows:

  • PSU: (1x) Corsair RM850 850W 92% Efficiency Active-PFC
  • Mobo: (1x) Gigabyte GA-EP45-UD3P (rev 1.1)
  • CPU: (1x) Intel Core 2 Quad Q8300 2.5GHz
  • RAM: (4x) Corsair XMS2 DDR2 800 (PC2 6400) 2GB
  • Gfx: (1x) NVIDIA GeForce 9500 GT PCI-E 2.0 x8
  • RAID: (1x) 3ware 9650SE-4LMPL PCI-E 2.0 x1
  • RAID: (4x) WD 1TB 7200RPM SATA-II HDD

Operating System

The cluster currently runs Debian 8.0 amd64. The recommended method of installing the base operating system is to download the Small CD ISO from Debian and burn it to a CD/DVD.

The (MBR) partitioning of the main 1TB disk should be:

Num. Size Filesystem Mount point
1 256 MB ext2 /boot
2 317 GB ext4 /
3 2.5 GB swap swap

The 2.7TB RAID5 array should already be partitioned (GPT). At all costs, maintain the integrity of the data already contained on the RAID5 array. Keep frequent backups of the array to at least one external source.

Other important settings to choose during the installation are summarized below: FIXME

Software

The software on the cluster consists of packages installed through the Debian repositories and third-party software installed into /opt. It is highly recommended that the software in this section be installed in the order it is listed here, if possible.

Debian Packages

Install Debian packages before third-party software, if at all possible. Many of these commands will require mounting the administrator flash drive, in which case this documentation assumes it will be mounted to /mnt/flash.

Initial configuration

We don't want all the ports on our precious cluster to be out there flapping in the breeze. Install some files that loosely restrict which daemons can provide services to which addresses:

install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/hosts.allow /etc/
install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/hosts.deny /etc/

Install a file that defines WAN and LAN IP-hostname mappings:

install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/hosts /etc/

Add support for hosting both 32-bit and 64-bit packages on this 64-bit system:

dpkg --add-architecture i386
apt-get update

Now install the the following packages using apt-get:

  • libc6-i686
  • libx11-6:i386
  • libxext6:i386

The groundwork

Some miscellaneous software packages need to be installed as boilerplate. Install the following packages using apt-get...

First, install some required shells:

  • tcsh
  • bash-completion

Lay down a decent text editor:

  • vim

Add a few extra utilities:

  • zip
  • nmap
  • links
  • rsync
  • screen
  • gnuplot
  • imagemagick

Now install some more language support:

  • pkg-config
  • build-essential
  • libtool
  • texlive
  • texi2html
  • ruby
  • gfortran
  • perl

Python

A few Python packages are standard fare for programmers in the group. Install the following packages using apt-get:

  • python3
  • python2.7
  • python3.2
  • python-numpy
  • python-sklearn
  • python-matplotlib

R

The R language is useful to some people, I guess.

  • r-base
  • r-recommended

Sudo

Install the sudo package using apt-get. Then add the following line to the /etc/sudoers file:

%bionmr ALL=(ALL:ALL) ALL

OpenSSH

The OpenSSH daemon allows users to log into the cluster from anywhere in the world using their RSA private key. First, install the following packages using apt-get:

  • openssh-client
  • openssh-server

Then install the /etc/ssh/sshd_config file from the administrator flash drive and restart the SSH daemon:

install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/ssh/sshd_config /etc/ssh/
service ssh restart

NFS

The NFS server allows users to access their files on campus from Debian Linux workstations. First, install the following packages using apt-get:

  • nfs-kernel-server
  • portmap

Then install the /etc/exports file from the administrator flash drive and restart the NFS daemon:

install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/exports /etc/
service nfs-kernel-server restart

Samba

The Samba server allows users to access their files on campus from Windows workstations. First, install the following packages using apt-get:

  • cifs-utils
  • samba

Then install the Samba configuration and password files and restart the Samba daemon:

install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/samba/smb.conf /etc/samba/
install -v -m 600 -o root -g root /mnt/flash/admin-tools/linux/cluster/var/lib/samba/passdb.tdb /var/lib/samba/
service samba restart

MTA

The exim4 package allows the server to send emails out to users about various things emails need to be sent for, and such. Mail transfer agent. You get the idea. Install the following package using apt-get:

  • exim4

Next, reconfigure the package using the following commands:

dpkg-reconfigure exim4
chmod +x /usr/sbin/exim4
rm -f /var/log/exim4/paniclog
touch /var/log/exim4/paniclog
service start exim4

You'll want to use the default values for every option during the configuration. Once that's done, you can test that the MTA is working by running the following command:


MySQL

FIXME

  • mysql-client
  • mysql-server

Apache

The Apache server hosts the group website, plain and simple. Install the following packages using apt-get:

  • apache2
  • apache2-doc

Then install the password file and an updated site configuration file and restart the Apache daemon:

install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/apache2/htpasswd /etc/apache2/
install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/apache2/sites-available/default /etc/apache2/sites-available
service apache2 restart

PHP

The PHP interpreter is required to host the website using the UNL university style templates. Install the following packages using apt-get:

  • php5
  • php5-mysql
  • php5-sqlite
  • libapache-mod-php5

Then download and install Pyrus (PEAR2) using the following commands:

wget http://pear2.php.net/pyrus.phar
install -v -m 644 -o root -g root pyrus.phar /usr/bin/
rm pyrus.phar

Open a new file in vi called /usr/bin/pyrus and add the following text:

#!/bin/bash
/usr/bin/php -dphar.readonly=0 /usr/bin/pyrus.phar $*

Save the file and make it executable:

chmod 755 /usr/bin/pyrus

Now run pyrus for the first time. Tell it yes to initialize the configuration. Tell it to install packages to /usr/share/pear by default, when it asks. Now install the UNL template package:

pyrus channel-discover pear.unl.edu
pyrus install -o pear.unl.edu/UNL_Templates-beta

Finally, install updated configuration files for PHP, restart the Apache server and remove the placeholder html page:

install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/php5/apache2/php.ini /etc/php5/apache2/
install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/php5/cli/php.ini /etc/php5/cli/
service apache2 restart
rm /var/www/index.html

DHCP

The cluster LAN is managed by a DHCP server on the second Ethernet port. Install the following package using apt-get:

  • isc-dhcp-server
  • bridge-utils
  • dnsmasq

Install the configuration files for the DHCP server:

install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/dhcp/dhcpd.conf /etc/dhcp/
install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/default/isc-dhcp-server /etc/default/
install -v -m 644 -o root -g root /mnt/flash/admin-tools/linux/cluster/etc/network/interfaces /etc/network/

Bring up the second Ethernet interface and restart the DHCP server:

ifup eth1
service isc-dhcp-server restart

Run the following commands:

brctl addbr br0
brctl addif br0 eth0 eth1
ifup br0

Octave

The Octave programming environment provides users with mathematical routines that simplify data handling. Install the following packages using apt-get:

  • octave
  • liboctave-dev
  • octave-audio
  • octave-control
  • octave-data-smoothing
  • octave-fixed
  • octave-fpl
  • octave-general
  • octave-geometry
  • octave-image
  • octave-io
  • octave-linear-algebra
  • octave-odepkg
  • octave-optim
  • octave-optiminterp
  • octave-pkg-dev
  • octave-plot
  • octave-quaternion
  • octave-signal
  • octave-specfun
  • octave-statistics
  • octave-strings

Third-party Software

FIXME